Air Bubble & Epe Foam Bag Making Machine

• Digitally length control automatic zero then start cycle
• High Speed Production capacity depen on size of bags
• Almost Maintenance free

• Bubble Sheet, Bubble Bag, EPE Foam Bag, EPE Sheet, HM Laminated EPE, etc.

• Turn bar assembly system to automatically fold the Bubble, EPE roll.
• Digitally length control Zero time for changing the size of the bag.
• Heavy duty and accurate automatically pulling system through imported rubber rollers.
• Complete Programming Logical Controlled System (P.L.C.) (Make: Siemens, Schneider)
• Machine Parameter setting controlled via HMI Touch Display (Make: Siemens, Schneider)
• Servo Controlled Pulling System for accurate cutting with maintain accuracy
• Stainless Steel Platform for Collection of production Bags.
• Digitally pouch counter with hooter for any special size and lot making of air bubble / epe bags.
• High Speed Production capacity up to 80 Bags per min.
• Higher grade integrated Electrical Panel for machine setting
• Various Model Available for 500, 750, 1000, 1500, 2000, 2500, 3000 mm.
• Variable sealing time to suit different thickness and different materials.
• Adjustable sealing temperature time through P.L.C. & HMI
• Pneumatic Technology used for efficient pouch sealing or cutting.
• Automatic sensors installed in pneumatic cylinders for accurate working

• Pouch width Min 50 mm
• Pouch width Max 3000 mm as per depend on the models of machine
• Sealing width Max 500 mm, 750 mm,1000 mm,1500, 2000, 3000 mm models available
• Speed Up to 80 bags Per minute.
• Material Bubble Sheet, EPE Foam, HM Laminated EPE, etc.
• Power 1.0 KW to 2.5 KW, 230 Volt, SINGLE / THREE Phase, 50 Hz. AC.

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealers for sealing and cutting bags
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Leveling pads will be provided for balancing at customers end

• Programming Logical Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro Panel view
• Sensors (Reed Switch) as per Cylinders
• SSR will be for immediately functions of devices
• Especially Design Transformer 0 to 60 Volt max output release for production
• Switch Gears will be use Schneider and Siemens

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JANITICES)
• Intermittent motion with continues working

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of Folder rollers (if Required) Optional Cost
• Bearing operated by engaged in aluminum rollers for help pulling of rolls
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags

• Rubber rolls used for pulling of EPE Roll (Synthetic Rubber Rolls)
• The Servo motor is stopped with effect of width sensed of the roll
• Starting of roll pulling is controlled by initial pulsing of PLC & Sensor
• Rolls pulling are controlled by Servo Motor
• Servo Motor controlled by PLC

• Micro view with HMI Touch Screen
• Loaded with Auto fault detection facility
• Displaying pouch counts, shift production, and other databases as per requirement
• Main drives synchronized for product take way belts
• Rubber belts used for finished product take away
• Maintains distance from basic machine for product collection and enhances

• Inputs/Outputs used according to bagging model and filling system decided
• HMI provided to change variable parameters and view the running functions such as
• Speeds/Minute
• Counter with Hooting
• Production per hour
• Fault detection facility
• Help toll provided to support the fault rectification

• Heavy duty and accurate automatically pulling system
• Higher grade integrated Electrical Panel
• Long-lasting service

Other Details:

• Turn bar assembly system to automatically fold the Bubble, EPE roll
• Digitally length control Zero time for changing the size of the bag
• Heavy duty and accurate automatically pulling system through imported rubber rollers
• Complete Programming Logical Controlled System (P.L.C.) (MAKE: PANASONIC, SIEMENS)
• Machine Parameter setting controlled via HMI Touch Display (MAKE: PANASONIC, SIEMENS)
• Servo Controlled Pulling System for accurate cutting with maintain accuracy (MAKE: PANASONIC, SIEMENS)
• Stainless Steel Platform for Collection of production Bags
• Digitally pouch counter with hooter for any special size and lot making of air bubble / epe bags
• Body Structure availables all around Stainless Steel with Folder or M.S painted with Folder
• High Speed Production capacity up to 40 Bags per min
• Higher grade integrated Electrical Panel for machine setting
• Various Model Available for 750, 1000, 1500, 2000, 2500, 3000 mm
• Variable sealing time to suit different thickness and different materials
• Adjustable sealing temperature time through P.L.C. & HMI
• Pneumatic Technology used for efficient pouch sealing or cutting

Specifications:

2.5 meter air bubble and epe foam bag making machine

Technical Data & Spare Parts specification:

Automatic Epe / Air Bubble Bag Making Machine:

• MS (Powder coated) Pipes used to construct the machine body.
• Pneumatically activated impulse sealers for sealing and cutting bags
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine.
• Leveling pads will be provided for balancing at customers end.

Electronic & Electrical Equipment:

• Programming Logical Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro Panel view.
• Proximities (Reed Switch) used will be SMC, JELPEC
• SSR will be for immediately functions of devices (MAKE: BTH)
• Especially Design Transformer 0 to 60 Volt max output release for production.
• Switch Gears will be use Schneider and Siemens

Vertical Sealing assembly:

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JELPEC)
• Intermittent motion with continues working

Unwinding assembly:

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of roll (if Required) Optional Cost
• Bearing operated by engaged in aluminum rollers for help pulling of rolls.
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags.

• Programming Logical Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro Panel view
• Sensors (Reed Switch) as per Cylinders
• SSR will be for immediately functions of devices
• Especially Design Transformer 0 to 60 Volt max output release for production
• Switch Gears will be use Schneider and Siemens

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JANITICES)
• Intermittent motion with continues working

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of Folder rollers (if Required) Optional Cost
• Bearing operated by engaged in aluminum rollers for help pulling of rolls
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags

• Rubber rolls used for pulling of EPE Roll (Synthetic Rubber Rolls)
• The Servo motor is stopped with effect of width sensed of the roll
• Starting of roll pulling is controlled by initial pulsing of PLC & Sensor
• Rolls pulling are controlled by Servo Motor
• Servo Motor controlled by PLC

• Micro view with HMI Touch Screen
• Loaded with Auto fault detection facility
• Displaying pouch counts, shift production, and other databases as per requirement
• Main drives synchronized for product take way belts
• Rubber belts used for finished product take away
• Maintains distance from basic machine for product collection and enhances

• Inputs/Outputs used according to bagging model and filling system decided
• HMI provided to change variable parameters and view the running functions such as
• Speeds/Minute
• Counter with Hooting
• Production per hour
• Fault detection facility
• Help toll provided to support the fault rectification

Owing to our vast industrial experience in this domain, we are devoted towards offering excellent range of Automatic Air Bubble Pouch Making Machine. This range is manufactured by making use of high quality raw material and advanced machines.

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealers for sealing and cutting bags
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Leveling pads will be provided for balancing at customers end

• Programming Logical Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro Panel view
• Sensors (Reed Switch) as per Cylinders
• SSR will be for immediately functions of devices (MAKE: BTH)
• Especially Design Transformer 0 to 60 Volt max output release for production
• Switch Gears will be use Schneider and Siemens

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JANITICES)
• Intermittent motion with continues working

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of Folder rollers (if Required) Optional Cost
• Bearing operated by engaged in aluminum rollers for help pulling of rolls
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags

• Rubber rolls used for pulling of EPE Roll (Synthetic Rubber Rolls)
• The Servo motor is stopped with effect of width sensed of the roll
• Starting of roll pulling is controlled by initial pulsing of PLC & Sensor
• Rolls pulling are controlled by Servo Motor
• Servo Motor controlled by PLC

• Micro view with HMI Touch Screen
• Loaded with Auto fault detection facility
• Displaying pouch counts, shift production, and other databases as per requirement
• Main drives synchronized for product take way belts
• Rubber belts used for finished product take away
• Maintains distance from basic machine for product collection and enhances

• Inputs/Outputs used according to bagging model and filling system decided
• HMI provided to change variable parameters and view the running functions such as
• Speeds/Minute
• Counter with Hooting
• Log details up t o7 days
• Production per hour
• Fault detection facility
• Help toll provided to support the fault rectification

Note: Price is  only for display purpose. Prices will depends upon dimensions and machines size type.

We hold expertise in offering a high grade range of Air Bubble Pouch Making Machine to our esteemed clients. Our offered range is manufactured using finest quality raw material and advanced technology at our well-established production unit.

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealer for sealing and cutting bags
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Levelling pads will be provided for balancing at customers end

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JANITICES)
• Intermittent motion with continues working

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of Folder rollers (if Required) Optional Cost
• Bearing operated by engaged in aluminium rollers for help pulling of rolls
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags

• Rubber rolls used for pulling of EPE Roll (Synthetic Rubber Rolls)
• The Servo motor is stopped with effect of width sensed of the roll
• Starting of roll pulling is controlled by initial pulsing of PLC & Sensor
• Rolls pulling are controlled by Servo Motor
• Servo Motor controlled by PLC

• High view with HMI Touch Screen
• Loaded with Auto fault detection facility
• Displaying pouch counts, shift production, and other databases as per requirement
• Main drives synchronized for product take way belts
• Rubber belts used for finished product take away
• Maintains distance from basic machine for product collection and enhances

• Inputs/Outputs used according to bagging model and filling system decided
• HMI provided to change variable parameters and view the running functions such as
• Speeds/Minute
• Counter with Hooting
• Production per hour
• Fault detection facility
• Log Report up to 7 days
• Help toll provided to support the fault rectification

The Plastic Air Bubble Bag Making Machine Segment Machine is performing horizontally electro-pneumatic bag making. This machine automatically prepares Air Bubble & epe foam bags from 2 side seal folding L SHAPE degree folder system.

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealers for sealing and cutting bags
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Leveling pads will be provided for balancing at customers end

• Programming Logical Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro Panel view
• Sensors (Reed Switch) as per Cylinders
• SSR will be for immediately functions of devices (MAKE: BTH)
• Especially Design Transformer 0 to 60 Volt max output release for production
• Switch Gears will be use Schneider and Siemens

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JANITICES)
• Intermittent motion with continues working

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of Folder rollers (if Required) Optional Cost
• Bearing operated by engaged in aluminum rollers for help pulling of rolls
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags

• Rubber rolls used for pulling of EPE Roll (Synthetic Rubber Rolls)
• The Servo motor is stopped with effect of width sensed of the roll
• Starting of roll pulling is controlled by initial pulsing of PLC & Sensor
• Rolls pulling are controlled by Servo Motor
• Servo Motor controlled by PLC

• Micro view with HMI Touch Screen
• Loaded with Auto fault detection facility
• Displaying pouch counts, shift production, and other databases as per requirement
• Main drives synchronized for product take way belts
• Rubber belts used for finished product take away
• Maintains distance from basic machine for product collection and enhances

• Inputs/Outputs used according to bagging model and filling system decided
• HMI provided to change variable parameters and view the running functions such as
• Speeds/Minute
• Counter with Hooting
• Production per hour
• Fault detection facility
• Help toll provided to support the fault rectification

While climbing on the success ladder, it has become increasingly important for us to deliver precisely tested and high grade assortment ofAir Bubble Bag Making Machine. Highly demanded in the global market, the offered machine is manufactured using high class components and contemporary techniques at our technically sound manufacturing unit. Apart from this, the provided machine is widely used for making bags which are used in various industries.

Salient Features:

• Turn bar assembly system to automatically fold the Bubble, EPE roll.
• Digitally length control Zero time for changing the size of the bag.
• Heavy duty and accurate automatically pulling system through imported rubber rollers.
• Complete Programming Logical Controlled System (P.L.C.)
• Machine Parameter setting controlled via HMI Touch Display
• Servo Controlled Pulling System for accurate cutting with maintain accuracy
• Stainless Steel Platform for Collection of production Bags.
• Digitally pouch counter with hooter for any special size and lot making of air bubble / epe bags.
• Body Structure availables all around Stainless Steel with Folder or M.S painted with Folder
• High Speed Production capacity up to 40 Bags per min.
• Higher grade integrated Electrical Panel for machine setting
• Various Model Available for 750, 1000, 1500, 2000, 2500, 3000 mm.
• Variable sealing time to suit different thickness and different materials.
• Adjustable sealing temperature time through P.L.C. & HMI
• Pneumatic Technology used for efficient pouch sealing or cutting.

Note: Price is  only for display purpose. Prices will depends upon dimensions and machines size type.

Specifications:

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealers for sealing and cutting bags
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Leveling pads will be provided for balancing at customers end

• Programming Logical Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro Panel view
• Sensors (Reed Switch) as per Cylinders
• SSR will be for immediately functions of devices (MAKE: BTH)
• Especially Design Transformer 0 to 60 Volt max output release for production
• Switch Gears will be use Schneider and Siemens

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JANITICES)
• Intermittent motion with continues working

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of Folder rollers (if Required) Optional Cost
• Bearing operated by engaged in aluminum rollers for help pulling of rolls
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags

• Rubber rolls used for pulling of EPE Roll (Synthetic Rubber Rolls)
• The Servo motor is stopped with effect of width sensed of the roll
• Starting of roll pulling is controlled by initial pulsing of PLC & Sensor
• Rolls pulling are controlled by Servo Motor
• Servo Motor controlled by PLC

• Micro view with HMI Touch Screen
• Loaded with Auto fault detection facility
• Displaying pouch counts, shift production, and other databases as per requirement
• Main drives synchronized for product take way belts
• Rubber belts used for finished product take away
• Maintains distance from basic machine for product collection and enhances

• Inputs/Outputs used according to bagging model and filling system decided
• HMI provided to change variable parameters and view the running functions such as
• Speeds/Minute
• Counter with Hooting
• Production per hour
• Fault detection facility
• Help toll provided to support the fault rectification

Note: Price is  only for display purpose. Prices will depends upon dimensions and machines size type.

The Air Bubble Sheet Bag Making Machine Segment Machine is performing horizontally electro-pneumatic bag making. This machine automatically prepares Air Bubble & epe foam bags from 2 side seal folding L SHAPE degree folder system.

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealers for sealing and cutting bags
• Stainless Steel Doors / cover for whole machine
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Leveling pads will be provided for balancing at customers end

• Inputs/Outputs used according to bagging model and filling system decided
• HMI provided to change variable parameters and view the running functions such as
• Speeds/Minute
• Counter with Hooting
• Production per hour
• Fault detection facility
• Help toll provided to support the fault rectification

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.

The 500 mm Small Air Bubble Bag Making Machine Segment Machine is performing horizontally electro-pneumatic bag making.

Technical Data & Spare Parts specification:

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealers for sealing and cutting bags
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Leveling pads will be provided for balancing at customers end

• Programming Logical Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro Panel view
• Sensors (Reed Switch) as per Cylinders
• SSR will be for immediately functions of devices (MAKE: BTH)
• Especially Design Transformer 0 to 60 Volt max output release for production
• Switch Gears will be use Schneider and Siemens

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JANITICES)
• Intermittent motion with continues working

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of Folder rollers (if Required) Optional Cost
• Bearing operated by engaged in aluminum rollers for help pulling of rolls
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags

• Rubber rolls used for pulling of EPE Roll (Synthetic Rubber Rolls)
• The Servo motor is stopped with effect of width sensed of the roll
• Starting of roll pulling is controlled by initial pulsing of PLC & Sensor
• Rolls pulling are controlled by Servo Motor
• Servo Motor controlled by PLC

• Micro view with HMI Touch Screen
• Loaded with Auto fault detection facility
• Displaying pouch counts, shift production, and other databases as per requirement
• Main drives synchronized for product take way belts
• Rubber belts used for finished product take away
• Maintains distance from basic machine for product collection and enhances

• Inputs/Outputs used according to bagging model and filling system decided
• HMI provided to change variable parameters and view the running functions such as
• Speeds/Minute
• Counter with Hooting
• Production per hour
• Fault detection facility
• Help toll provided to support the fault rectification

The Air Bubble Bag Making Machine 3 Side Seal Segment Machine is performing horizontally electro-pneumatic bag makingHighly demanded in the global market, the offered machine is manufactured using high class components and contemporary techniques at our technically sound manufacturing unit. Apart from this, the provided machine is widely used for making bags which are used in various industries

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealers for sealing and cutting bags
• Mild Steel Doors / cover for whole machine
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Leveling pads will be provided for balancing at customers end

• Programming Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro Panel view
• Sensors (Reed Switch) as per Cylinders
• SSR will be for immediately functions of devices (MAKE: BTH)
• Especially Design Transformer 0 to 60 Volt max output release for production
• Switch Gears will be use Schneider and Siemens

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of Folder rollers (if Required) Optional Cost
• Bearing operated by engaged in aluminum rollers for help pulling of rolls
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags

Note: Price is  only for display purpose. Prices will depends upon dimensions and machines size type.

The Double Layer Air Bubble Sheet Bag Making Machine Segment Machine is performing horizontally electro-pneumatic bag making. This machine automatically prepares Air Bubble & epe foam bags from 2 side seal folding L SHAPE degree folder system.

Technical Data & Spare Parts specification:

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealers for sealing and cutting bags
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Leveling pads will be provided for balancing at customers end

• Programming Logical Controlled (PLC) with Touch Screen Display for setting parameters
• Operator Interface Micro Panel view
• Sensors (Reed Switch) as per Cylinders
• SSR will be for immediately functions of devices (MAKE: BTH)
• Especially Design Transformer 0 to 60 Volt max output release for production
• Switch Gears will be use Schneider and Siemens

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JANITICES)
• Intermittent motion with continues working

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of Folder rollers (if Required) Optional Cost
• Bearing operated by engaged in aluminum rollers for help pulling of rolls
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags

• Rubber rolls used for pulling of EPE Roll (Synthetic Rubber Rolls)
• The Servo motor is stopped with effect of width sensed of the roll
• Starting of roll pulling is controlled by initial pulsing of PLC & Sensor
• Rolls pulling are controlled by Servo Motor
• Servo Motor controlled by PLC

• Micro view with HMI Touch Screen
• Loaded with Auto fault detection facility
• Displaying pouch counts, shift production, and other databases as per requirement
• Main drives synchronized for product take way belts
• Rubber belts used for finished product take away
• Maintains distance from basic machine for product collection and enhances

• Inputs/Outputs used according to bagging model and filling system decided
• HMI provided to change variable parameters and view the running functions such as
• Speeds/Minute
• Counter with Hooting
• Production per hour
• Fault detection facility
• Help toll provided to support the fault rectification

The Anti Static Air Bubble Bag Making Machine Segment Machine is performing horizontally electro-pneumatic bag making. This machine automatically prepares Air Bubble & epe foam bags from 2 side seal folding L SHAPE degree folder system.

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealers for sealing and cutting bags
• Carbon Steel Doors / cover for whole machine
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Leveling pads will be provided for balancing at customers end

• Programming Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro Panel view
• Sensors (Reed Switch) as per Cylinders
• SSR will be for immediately functions of devices (MAKE: BTH)
• Especially Design Transformer 0 to 60 Volt max output release for production
• Switch Gears will be use Schneider and Siemens

The Bubble Sheet Bag Making Machine Segment Machine is performing horizontally electro-pneumatic bag making. This machine automatically prepares Air Bubble & epe foam bags from 2 side seal folding L SHAPE degree folder system. While climbing on the success ladder, it has become increasingly important for us to deliver precisely tested and high grade assortment of EPE / Air Bubble Bag Making with Foam Sheet Cutting Attachment Machine. Highly demanded in the global market, the offered machine is manufactured using high class components and contemporary techniques at our technically sound manufacturing unit. Apart from this, the provided machine is widely used for making bags which are used in various industries.

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealers for sealing and cutting bags
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Leveling pads will be provided for balancing at customers end

• Programming Logical Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro Panel view
• Sensors (Reed Switch) as per Cylinders
• SSR will be for immediately functions of devices (MAKE: BTH)
• Especially Design Transformer 0 to 60 Volt max output release for production
• Switch Gears will be use Schneider and Siemens

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JANITICES)
• Intermittent motion with continues working

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of Folder rollers (if Required) Optional Cost
• Bearing operated by engaged in aluminum rollers for help pulling of rolls
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags

• Rubber rolls used for pulling of EPE Roll (Synthetic Rubber Rolls)
• The Servo motor is stopped with effect of width sensed of the roll
• Starting of roll pulling is controlled by initial pulsing of PLC & Sensor
• Rolls pulling are controlled by Servo Motor
• Servo Motor controlled by PLC

• Micro view with HMI Touch Screen
• Loaded with Auto fault detection facility
• Displaying pouch counts, shift production, and other databases as per requirement
• Main drives synchronized for product take way belts
• Rubber belts used for finished product take away
• Maintains distance from basic machine for product collection and enhances

• Inputs/Outputs used according to bagging model and filling system decided
• HMI provided to change variable parameters and view the running functions such as
• Speeds/Minute
• Counter with Hooting
• Production per hour
• Fault detection facility
• Help toll provided to support the fault rectification

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.

While climbing on the success ladder, it has become increasingly important for us to deliver precisely tested and high grade assortment of Air Bubble Pouch Making Machine. Highly demanded in the global market, the offered machine is manufactured using high class components and contemporary techniques at our technically sound manufacturing unit. Apart from this, the provided machine is widely used for making bags which are used in various industries.

Salient Features:

• Turn bar assembly system to automatically fold the Bubble, EPE roll.
• Digitally length control Zero time for changing the size of the bag.
• Heavy duty and accurate automatically pulling system through imported rubber rollers.
• Complete Programming Logical Controlled System (P.L.C.)
• Machine Parameter setting controlled via HMI Touch Display
• Servo Controlled Pulling System for accurate cutting with maintain accuracy
• Stainless Steel Platform for Collection of production Bags.
• Digitally pouch counter with hooter for any special size and lot making of air bubble / epe bags.
• Body Structure availables all around Stainless Steel with Folder or M.S painted with Folder
• High Speed Production capacity up to 40 Bags per min.
• Higher grade integrated Electrical Panel for machine setting
• Various Model Available for 750, 1000, 1500, 2000, 2500, 3000 mm.
• Variable sealing time to suit different thickness and different materials.
• Adjustable sealing temperature time through P.L.C. & HMI
• Pneumatic Technology used for efficient pouch sealing or cutting.

Note: Price is  only for display purpose. Prices will depends upon dimensions and machines size type.

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealer for sealing and cutting bags
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Levelling pads will be provided for balancing at customers end

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JANITICES)
• Intermittent motion with continues working

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of Folder rollers (if Required) Optional Cost
• Bearing operated by engaged in aluminium rollers for help pulling of rolls
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags

• Rubber rolls used for pulling of EPE Roll (Synthetic Rubber Rolls)
• The Servo motor is stopped with effect of width sensed of the roll
• Starting of roll pulling is controlled by initial pulsing of PLC & Sensor
• Rolls pulling are controlled by Servo Motor
• Servo Motor controlled by PLC

• High view with HMI Touch Screen
• Loaded with Auto fault detection facility
• Displaying pouch counts, shift production, and other databases as per requirement
• Main drives synchronized for product take way belts
• Rubber belts used for finished product take away
• Maintains distance from basic machine for product collection and enhances

• Inputs/Outputs used according to bagging model and filling system decided
• HMI provided to change variable parameters and view the running functions such as
• Speeds/Minute
• Counter with Hooting
• Production per hour
• Fault detection facility
• Log Report up to 7 days
• Help toll provided to support the fault rectification

We are Manufacturer high quality Air Bubble Envelope Making Machine. Highly demanded in the global market, the offered machine is manufactured using high class components and contemporary techniques at our technically sound manufacturing unit.

Salient Features:

• Turn bar assembly system to automatically fold the Bubble, EPE roll.
• Digitally length control Zero time for changing the size of the bag.
• Heavy duty and accurate automatically pulling system through imported rubber rollers.
• Complete Programming Logical Controlled System (P.L.C.)
• Machine Parameter setting controlled via HMI Touch Display
• Servo Controlled Pulling System for accurate cutting with maintain accuracy
• Stainless Steel Platform for Collection of production Bags.
• Digitally pouch counter with hooter for any special size and lot making of air bubble / epe bags.
• Body Structure availables all around Stainless Steel with Folder or M.S painted with Folder
• High Speed Production capacity up to 40 Bags per min.
• Higher grade integrated Electrical Panel for machine setting
• Various Model Available for 750, 1000, 1500, 2000, 2500, 3000 mm.
• Variable sealing time to suit different thickness and different materials.
• Adjustable sealing temperature time through P.L.C. & HMI
• Pneumatic Technology used for efficient pouch sealing or cutting.

Brand:KI-MACHINES

Size/Dimension:as per specification

Color:black, orange, green, blue

We hold expertise in offering a high grade range of Air Bubble Bag Sealing Cutting Machine to our esteemed clients. Our offered range is manufactured using finest quality raw material and advanced technology at our well-established production unit.

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealer for sealing and cutting bags
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Levelling pads will be provided for balancing at customers end

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JANITICES)
• Intermittent motion with continues working

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of Folder rollers (if Required) Optional Cost
• Bearing operated by engaged in aluminium rollers for help pulling of rolls
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags

• Rubber rolls used for pulling of EPE Roll (Synthetic Rubber Rolls)
• The Servo motor is stopped with effect of width sensed of the roll
• Starting of roll pulling is controlled by initial pulsing of PLC & Sensor
• Rolls pulling are controlled by Servo Motor
• Servo Motor controlled by PLC

• High view with HMI Touch Screen
• Loaded with Auto fault detection facility
• Displaying pouch counts, shift production, and other databases as per requirement
• Main drives synchronized for product take way belts
• Rubber belts used for finished product take away
• Maintains distance from basic machine for product collection and enhances

• Inputs/Outputs used according to bagging model and filling system decided
• HMI provided to change variable parameters and view the running functions such as
• Speeds/Minute
• Counter with Hooting
• Production per hour
• Fault detection facility
• Log Report up to 7 days
• Help toll provided to support the fault rectification

Foam Bag Pouch Making Machine effectively used for sealing various sizes of air bubble and epe foam pouches. These machines are consistent, high speed and excellent in performance.

 

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.

Salient Features:

• Turn bar assembly system to automatically fold the Bubble, EPE roll.
• Digitally length control Zero time for changing the size of the bag.
• Heavy duty and accurate automatically pulling system through imported rubber rollers.
• Complete Programming Logical Controlled System (P.L.C.) 
• Machine Parameter setting controlled via HMI Touch Display 
• Servo Controlled Pulling System for accurate cutting with maintain accuracy 
• Stainless Steel Platform for Collection of production Bags.
• Digitally pouch counter with hooter for any special size and lot making of air bubble / epe bags.
• Body Structure availables all around Stainless Steel with Folder or M.S painted with Folder
• High Speed Production capacity up to 80 Bags per min.
• Higher grade integrated Electrical Panel for machine setting
• Various Model Available for 500, 750, 1000, 1500, 2000, 2500, 3000 mm.
• Variable sealing time to suit different thickness and different materials.
• Adjustable sealing temperature time through P.L.C. & HMI
• Pneumatic Technology used for efficient pouch sealing or cutting.

With our in-depth knowledge and experience of this industry, we are engaged in offering an excellent range of EPE Bags Maker Machine. This machine is developed from the excellent quality of material as per the set standard of industry. Provided machine is stringently tested on diverse parameters so as to deliver a flawless range. Customers can avail this machine from us at market rates in a promised time frame.

Features:

• Enhanced service life
• Low operational cost
• Adjustable sealing temperature time

Other Details:

• Turn bar assembly system to automatically fold the Bubble, EPE roll

• Digitally length control Zero time for changing the size of the bag

• Heavy duty and accurate automatically pulling system through imported rubber rollers

• Complete Programming Logical Controlled System (P.L.C.) (MAKE: PANASONIC, SIEMENS)

• Machine Parameter setting controlled via HMI Touch Display (MAKE: PANASONIC, SIEMENS)

• Servo Controlled Pulling System for accurate cutting with maintain accuracy (MAKE: PANASONIC, SIEMENS)

• Stainless Steel Platform for Collection of production Bags

• Digitally pouch counter with hooter for any special size and lot making of air bubble / epe bags

• Body Structure availables all around Stainless Steel with Folder or M.S painted with Folder

• High Speed Production capacity up to 40 Bags per min

• Higher grade integrated Electrical Panel for machine setting

• Various Model Available for 750, 1000, 1500, 2000, 2500, 3000 mm

• Variable sealing time to suit different thickness and different materials

• Adjustable sealing temperature time through P.L.C. & HMI

• Pneumatic Technology used for efficient pouch sealing or cutting

Specifications:

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.

• MS (Powder coated) Pipes used to construct the machine body.
• Pneumatically activated impulse sealers for sealing and cutting bags
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine.
• Leveling pads will be provided for balancing at customers end.

Electronic & Electrical Equipment:

• Programming Logical Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro Panel view.
• Proximities (Reed Switch) used will be SMC, JNATICES
• SSR will be for immediately functions of devices (MAKE: BTH)
• Especially Design Transformer 0 to 60 Volt max output release for production.
• Switch Gears will be use Schneider and Siemens

Vertical Sealing assembly:

• Ratios of movement driven by Pneumatic cylinders (MAKE: SMC, JELPEC)
• Intermittent motion with continues working

Unwinding assembly:

• Main reel shaft for loading of EPE / Air Bubble Roll
• Motorized used for unwinding of roll (if Required) Optional Cost
• Bearing operated by engaged in aluminum rollers for help pulling of rolls.
• 1 side fold and 2 side seal L shape degree folder for automatic folding bags.

Roll Pulling Assembly:

• Rubber rolls used for pulling of EPE Roll (Synthetic Rubber Rolls)
• The Servo motor is stopped with effect of width sensed of the roll
• Starting of roll pulling is controlled by initial pulsing of PLC & Sensor.
• Rolls pulling are controlled by Servo Motor.
• Servo Motor controlled by PLC.

Operator Interface Control Panel:

• High view with HMI Touch Screen Display
• Loaded with Auto fault detection facility
• Displaying pouch counts, shift production, and other databases as per requirement

Finished Pouches take Away Belts conveyor (Optional):

• Main drives synchronized for product take way belts.
• Rubber belts used for finished product take away.
• Maintains distance from basic machine for product collection and enhances

PLC (Programmable Logic Control):

• Inputs/Outputs used according to bagging model and filling system decided.
• HMI provided to change variable parameters and view the running functions such as:
• Speeds/Minute
• Counter with Hooting
• Production per hour
• Fault detection facility
• Help toll provided to support the fault rectification

The Automatic LD Bag Making Machine Segment Machine is performing horizontally electro-pneumatic bag making. This machine automatically prepares Air Bubble & epe foam bags from 2 side seal folding L SHAPE degree folder system.

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealers for sealing and cutting bags
• Carbon Steel Doors / cover for whole machine
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Leveling pads will be provided for balancing at customers end

• Programming Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro High Panel view
• Sensors (Reed Switch) as per Cylinders
• SSR will be for immediately functions of devices (MAKE: BTH)
• Especially Design Transformer 0 to 60 Volt max output release for production
• Switch Gears will be use Schneider and Siemens

While climbing on the success ladder, it has become increasingly important for us to deliver precisely tested and high grade assortment of Double Layer Four Line Bottom Seal Bag Making Machine. Highly demanded in the global market, the offered machine is manufactured using high class components and contemporary techniques at our technically sound manufacturing unit. Apart from this, the provided machine is widely used for making bags which are used in various industries.

Salient Features:

• Turn bar assembly system to automatically poly roll.
• Digitally length control Zero time for changing the size of the bag.
• Heavy duty and accurate automatically pulling system through imported rubber rollers.
• Complete Programming Logical Controlled System (P.L.C.)
• Machine Parameter setting controlled via HMI Touch Display
• Servo Controlled Pulling System for accurate cutting with maintain accuracy
• Stainless Steel Platform for Collection of production Bags.
• Digitally pouch counter with hooter for any special size and lot making of pouches / bags
• Body Structure availables all around Stainless Steel with Folder or M.S painted with Folder
• High Speed Production capacity up to 100 Bags per min.
• Higher grade integrated Electrical Panel for machine setting
• Various Model Available for 400, 500, 600, 800 mm.
• Variable sealing time to suit different thickness and different materials.
• Adjustable sealing temperature time through auto cooling heating system parameters
• Pneumatic Technology used for efficient pouch sealing or cutting.

Note: Price is  only for display purpose. Prices will depends upon dimensions and machines size type.

Specifications:

The Epe Sheet Bag Making Machine Segment Machine is performing horizontally electro-pneumatic bag making. This machine automatically prepares Air Bubble & epe foam bags from 2 side seal folding L SHAPE degree folder system.

• MS (Powder coated / Painted) Pipes used to construct the machine body
• Pneumatically activated impulse sealers for sealing and cutting bags
• Carbon Steel Doors / cover for whole machine
• Higher accurate Servo Controlled Motor used for Epe Roll pulling & sealing
• Castor wheels will be provided for easy location of machine
• Leveling pads will be provided for balancing at customers end

• Programming Controlled (PLC) with Touch Screen Display for setting parameters of machine
• Operator Interface Micro Panel view
• Sensors (Reed Switch) as per Cylinders
• SSR will be for immediately functions of devices (MAKE: BTH)
• Especially Design Transformer 0 to 60 Volt max output release for production
• Switch Gears will be use Schneider and Siemens